e:\katago\katago.exe
gtp -model model.bin.gz -config gtp_example.cfg
time_settings 0 5 1
LZ shows the percentage, but KataGo shows nothing:
| Attachments: |
|
winrate.jpg [ 137.93 KiB | Viewed 15657 times ] |
| Life In 19x19 http://lifein19x19.com/ |
|
| Sabaki http://lifein19x19.com/viewtopic.php?f=18&t=17321 |
Page 1 of 2 |
| Author: | And [ Sat Mar 14, 2020 11:31 am ] |
| Post subject: | Sabaki |
Sabaki v0.50.0 Mar 11, 2020, Sabaki v0.50.1 Mar 13, 2020 https://github.com/SabakiHQ/Sabaki/releases many new interesting! |
|
| Author: | And [ Sun Mar 15, 2020 1:22 pm ] |
| Post subject: | Re: Sabaki |
can I display a winrate KataGo? |
|
| Author: | Jæja [ Mon Mar 16, 2020 5:29 am ] |
| Post subject: | Re: Sabaki |
And wrote: can I display a winrate KataGo? There are some minor inconsistencies between LeelaZero and KataGo that needs to be resolved in order for Sabaki to process KataGo's winrate outputs. The author of Sabaki and author (and forum member) lightvector are currently sorting this out. |
|
| Author: | lightvector [ Mon Mar 16, 2020 5:48 am ] |
| Post subject: | Re: Sabaki |
Has Sabaki suddenly stopped supporting KataGo? It used to work just fine for winrates. The only things you couldn't get were score/ownership, but Leela Zero didn't have those either. (KataGo implements essentially the same score-less analysis command that Leela Zero does). |
|
| Author: | And [ Mon Mar 16, 2020 12:03 pm ] |
| Post subject: | Re: Sabaki |
ok, please write how to do this! and where can I see what commands or parameters can be used after "gtp -model model.txt -config gtp_example.cfg" |
|
| Author: | lightvector [ Mon Mar 16, 2020 7:52 pm ] |
| Post subject: | Re: Sabaki |
Just give Sabaki the engine command just as with Lizzie or anything other GUI. There's nothing special. Make sure you have the file paths correct from Sabaki's perspective. To see parameters, you can run with "gtp -help" also. But there aren't really other parameters you should care about after "gtp -model model.txt -config gtp_example.cfg". The whole point of having the config file is to put all the parameters you can modify in one place, take a look at the config. If you really do want to modify any config parameter directly on command line, it's "-override-config KEY=VALUE,KEY=VALUE,...". |
|
| Author: | ez4u [ Mon Mar 16, 2020 8:45 pm ] |
| Post subject: | Re: Sabaki |
Is there a way to set the komi to 6.5 points via the config file? I could not find one. These days Katago with Japanese rules is my default. |
|
| Author: | lightvector [ Mon Mar 16, 2020 9:12 pm ] |
| Post subject: | Re: Sabaki |
No, the komi value is part of the GTP protocol and setting it is up to the GUI or analysis software you are using. A GUI will typically specify the komi to the bot upon setting up a new empty board. |
|
| Author: | And [ Tue Mar 17, 2020 4:16 am ] | ||
| Post subject: | Re: Sabaki | ||
e:\katago\katago.exe gtp -model model.bin.gz -config gtp_example.cfg time_settings 0 5 1 LZ shows the percentage, but KataGo shows nothing:
|
|||
| Author: | lightvector [ Tue Mar 17, 2020 5:28 am ] |
| Post subject: | Re: Sabaki |
KataGo does, but it's inside the "info move (...)" that Sabaki is hiding from you for some reason. Use Sabaki's built-in analysis feature instead of looking at the console. |
|
| Author: | Vargo [ Tue Mar 17, 2020 6:29 am ] |
| Post subject: | Re: Sabaki |
And wrote: but KataGo shows nothing: if I change in the KG config file "logToStderr = true", Sabaki 0.50.1 shows winrate, etc. Maybe it would be the same for you ? |
|
| Author: | And [ Tue Mar 17, 2020 8:17 am ] |
| Post subject: | Re: Sabaki |
Vargo thank you very much! it works! |
|
| Author: | And [ Tue Mar 17, 2020 8:20 am ] |
| Post subject: | Re: Sabaki |
lightvector wrote: KataGo does, but it's inside the "info move (...)" that Sabaki is hiding from you for some reason. Use Sabaki's built-in analysis feature instead of looking at the console. I can not find! how to do it? Tell me please! |
|
| Author: | lightvector [ Tue Mar 17, 2020 8:44 am ] |
| Post subject: | Re: Sabaki |
And wrote: lightvector wrote: KataGo does, but it's inside the "info move (...)" that Sabaki is hiding from you for some reason. Use Sabaki's built-in analysis feature instead of looking at the console. I can not find! how to do it? Tell me please! Engines -> Toggle Analysis? |
|
| Author: | And [ Tue Mar 17, 2020 8:50 am ] |
| Post subject: | Re: Sabaki |
lightvector it is not that, but it is very interesting! thank you very much! |
|
| Author: | And [ Tue Mar 17, 2020 9:07 am ] |
| Post subject: | Re: Sabaki |
Vargo can I remove the output image of the board? |
|
| Author: | Vargo [ Tue Mar 17, 2020 11:11 am ] |
| Post subject: | Re: Sabaki |
I don't know, you should ask lightvector. |
|
| Author: | And [ Sun Apr 05, 2020 10:32 am ] |
| Post subject: | Re: Sabaki |
Sabaki v0.51.0 https://github.com/SabakiHQ/Sabaki/releases |
|
| Author: | And [ Sun Apr 12, 2020 2:42 pm ] |
| Post subject: | Re: Sabaki |
Sabaki v0.51.1 https://github.com/SabakiHQ/Sabaki/releases Added Portable version for Windows French language support Fixed Fix relative coordinates representation |
|
| Author: | And [ Tue Apr 14, 2020 1:19 pm ] |
| Post subject: | Re: Sabaki |
a few seconds to connect KataGo and enable analysis mode! Lizzie, after launch, thinks about 20 seconds! |
|
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|